Color Registration - Kyocera FS C8026N Operation Manual

2 2 2 2
Press the or
appears.
Others >
3 3 3 3
Press the key.
4 4 4 4
Press the or
Mono. mix appears.
>Color/Mono. mix
5 5 5 5
Press the ENTER key. A blinking question mark (?)
appears.
>Color/Mono. mix
? Auto
6 6 6 6
Press the or
7 7 7 7
Press the ENTER key.
8 8 8 8
Press the ENTER key. This display returns to Ready.

3.13.14 Color Registration

Perform the following procedure for color registration in case
of color shear.
A Color Registration Correction Chart will be
printed out in A3 size paper when performing
the procedure for color registration. Set A3 size
Note
paper into paper cassette before proceeding.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the key repeatedly until Others > appears
in the message display.
3 3 3 3
Press the key.
4 4 4 4
Press the key repeatedly until >Color
Registration > appears.
>Color
Registration
key repeatedly until Others >
key repeatedly until >Color/
key to select the setting you want.
>
5 5 5 5
Press the key.
6 6 6 6
>>Print Regist Chart appears.
>>Print
Regist Chart
7 7 7 7
Press the ENTER key. A question mark (?) appears.
>>Print
Regist Chart ?
8 8 8 8
Press the ENTER key. A Color Registration
Correction Chart (shown) will be printed out.
Calibration is done using the left (L), right (R) and
horizontal (H) scales in cyan, magenta and yellow
colors by adjusting corresponding values displayed in
the following steps.
Figure 3-16
3-65
3.13 Other Modes