Software - Kyocera FS C8026N Operation Manual

Color page printer
Table of Contents

Advertisement

1.1 Features
Two expansion slots for hardware interfaces
The printer is equipped with two expansion slots for plugging in an optional network
interface card and a hard disk (HD-10).
Standard bidirectional parallel interface
The bidirectional parallel interface ensures high-speed data transfer between the host
computer and printer.
Memory card slot
You can select and read the data in a memory card inserted in this slot from the printer
operator panel.
Paper cassette and tray
The paper cassette can hold approximately 500 sheets of paper. The printer also has a MP
(multipurpose) tray that can hold approximately 150 sheets.
Options
Available options include a large-capacity paper feeder, duplex unit, document finisher, and
more.
1.1.3

Software

e-MPS
'e-MPS' is an abbreviation for 'enhanced-Multiple Printing System,' which is a
post-processing function that combines electronic sorting, job retention, and virtual
mailboxing.
When printing multiple copies of a document, the data is transferred from the computer to
the printer only for the first copy; the data is then stored on the printer's hard disk. Copies of
the document are printed using the stored data.
Printing is performed faster with less computer spooling time and less network traffic.
Furthermore, printed data that is stored on the hard disk can be called up using job retention
functions, such as Quick Copy etc., allowing you to quickly print additional copies of a
document from the printer at any time, without needing to re-spool the document or start up
the computer system.
Printer Control Language PRESCRIBE
The printer uses PRESCRIBE, Kyocera Mita's page printer control language with enhanced
color graphics capabilities. The simple commands of PRESCRIBE allow the programmers
to easily define pagination and device control.
KPDL3 (Kyocera Printer Description Language 3)
The printer uses KPDL3, Kyocera's implementation of the PostScript page description
language Level 3. The printer has 136 fonts that are compatible with Adobe PostScript
fonts. The printer also has 80 PCL fonts.
1-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-c8008nFs-c8026n-aFs-c8026n-bFs-c8026n

Table of Contents