Table of Contents
Advertisement
3.1.2
Indicators in message display
Message
Sleeping
Cancelling data
Waiting
FormFeed TimeOut
Table 3-1 (Continued)
Error codes
See
Chapter 4
Troubleshooting.
Figure 3-2
Interface indicator (INTERFACE)
The interface indicator shows the interface that is currently in use:
PAR
Parallel interface is in use.
NET
Network interface is in use.
OPT
Option network interface is in use.
SER
Option serial (RS-232C) interface is in use.
---
No interface is in use.
Each interface has a timeout time of 30 seconds during which the other interface should wait
to receive a print job. Even a print job has been complete on the interface, you should wait
for this period until the other interface begins printing the job.
Meaning
The printer is in sleep mode. The printer wakes from sleep mode
whenever a key on the operator panel is pressed, the cover is
opened or closed, or a print job is received. The printer then
warms up and goes on-line. For details on sleep mode, see
timer timeout on page
Jobs inside the printer are being canceled. To cancel a job, see
Section 3.1.3 Keys on page
The printer is waiting for the rest of print job before completing
the last page. Pressing the GO key allows you to obtain the last
page immediately. See below.
The printer is printing the last page after a waiting period.
3-3
3.1 Understanding the Operator Panel
3-59.
3-6.
Sleep
Advertisement
Table of Contents
