Default Font - Kyocera FS C8026N Operation Manual

3.6 Making Default Settings
3 3 3 3
Press the ENTER key. A blinking question mark (?)
appears.
Emulation
?PCL 6
4 4 4 4
Select KPDL or KPDL (AUTO) using the
Emulation
?KPDL
5 5 5 5
Press the ENTER key.
6 6 6 6
Press the key. Press the
KPDL Errs (errors) appears.
>Print KPDL Errs
Off
7 7 7 7
Press the ENTER key. A blinking question mark (?)
appears.
8 8 8 8
Select On using the
key.
>Print KPDL Errs
? Off
9 9 9 9
Press the MENU key. The display returns to Ready.
3.6.5

Default Font

You can select the default font for the current interface. The
default font can be one of the internal fonts or a font that is
downloaded to the printer memory or stored on memory card or
hard disk. The default font of internal fonts is Courier (I000).
In this menu, you can also set the type and pitch for Courier
and Letter Gothic; as well as to print a font list.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
appears.
Font
or key until >Print
key. Press the ENTER
or
key repeatedly until Font >
>
3 3 3 3
Press the
Select > appears.
>Font Select
4 4 4 4
To select an internal font, make sure that Internal
or key.
is displayed and press the
as shown below. If Internal is not displayed, press
the ENTER key, then press the
appears.
>> I000
To select an optional font, press the ENTER key
while >Font Select > is displayed. Press the
or
press the ENTER key. Press the
the font selection shown above. You can perform this
operation only when optional fonts are installed in the
printer.
The letter before the number indicates the location of
the font, as shown below:
I
SO
MO
HO
5 5 5 5
Press the ENTER key. A blinking question mark (?)
appears.
>>?I000
6 6 6 6
Press the
number appears. For font numbers of the internal
fonts, see
7 7 7 7
When the desired font is displayed, press the ENTER
key.
8 8 8 8
Press the MENU key. The display returns to Ready.
3-34
key. Press the or
>
Internal
key. The display changes
key repeatedly until Option appears and then
Internal font
Soft (downloaded) font
Fonts in optional memory card
Fonts in RAM disk or optional hard disk (HD-10)
or key repeatedly until the desired font
Printing lists of fonts on page
key until >Font
or key until it
key next to display
3-36.