Page 1
Removing paper jams from your FS-C8026N printer The figure below explains the printer’s paper paths including the options, for example, the document finisher and the duplexer. The locations where paper jams might occur are also shown here. Paper jams can occur in more than one component on the paper paths.
Page 2
2. If you cannot remove the jammed paper as shown in step 1, remove the paper cassette from the printer. 3. Pull the jammed paper from inside the printer. Jams in the Mp Tray 1. Remove the jammed paper on the MP tray up and towards the right.
Page 3
3. Pull the lever on the bottom of the Duplex Unit towards you, and open the bottom cover. 4. Remove the jammed paper. 5. Close the bottom cover and top cover. 6. Slide the Duplex Unit back into the printer. Jams in the Right Cover 1.
Page 4
4. Remove the jammed paper. If the end of the paper is soiled with toner, pull it in the direction indicated by the arrow to remove it 5. Pressing the handle of the transfer unit, return the transfer unit securely to its original position. Jams in the Paper Feed Unit 1.
Page 5
Push the paper feed unit in until it locks in place with a click.Return the paper transfer unit back into the printer. Jams in the Paper Feed Unit CAUTION: The fuser unit and rollers become very hot during normal use. Never touch them with your hands. 1.
Need help?
Do you have a question about the FS-C8026N and is the answer not in the manual?
Questions and answers