User Error Messages - Lexmark 522n - C Color Laser Printer Service Manual

4520-xxx
User Status Message
Programming Disk
(Do Not Power Off)
Menus Disabled
Activating Menu
Changes

User Error Messages

User Error Message
200 Paper Jam
Remove Cartridge
201 Paper Jam
Remove Cartridge
202 Paper Jam
Open Rear Door
Status
The disk is being
programmed, which
means fonts or macros
are being written to disk.
The printer menus have
been disabled. This
occurs when Menu is
pressed while the printer
is Ready and Menu
Lockout is active. The
printer display shows
this message for one
second and then returns
to the Ready message.
The printer is reset to
activate a printer setting
changed in the menus.
Explanation
Paper is jammed at the printer Input Sensor.
Open the printer upper front door and remove the
print cartridge to access the paper jam area.
Paper is jammed between the printer input and
exit sensors. Open the printer upper front door
and remove the print cartridge to access the jam
area.
Paper is jammed at the printer exit sensor. Open
the printer rear door to access the jam area.
Action
No button actions are
possible while this
message is displayed.
Note: If information is
written to flash
memory and to disk at
the same time, the
Program Flash
message is displayed.
No button actions are
possible while this
message is displayed.
No button actions are
possible while this
message is displayed.
Diagnostic Information
2-25