Setting The Unit Of Measurement - KTM 450 EXC-F 2019 Owner's Manual

7 COMBINATION INSTRUMENT
7.10
28

Setting the unit of measurement

400329-01
Info
Repeatedly press the button
function is reached.
If no button is pressed for 20 seconds, the settings are
automatically saved.
Briefly press Activates the flashing display and changes to
the button . the next display
Press the but- No function
ton for 2–3
seconds.
Briefly press Deactivates the flashing display and changes to
the button . the next display
Press the but- No function
ton for 2–3
seconds.
Wait 3 - 5 Changes to the next display without changes
seconds.
Wait 10 - 12 Setup menu starts, stores the settings, and
seconds. changes to H or ODO.
Condition
• The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button for 2–3 seconds.
–
Repeatedly press the button
In measurement unit mode, you can change the unit of measure-
ment.
Info
If no button is pressed for 5 seconds, the settings are auto-
matically saved.
Briefly press Starts selection, activates Km/h display
the button .
Press the but- No function
ton for 2–3
seconds.
Activates Mph display
Briefly press
the button .
Press the but- No function
ton for 2–3
seconds.
Wait 3 - 5 Changes to the next display, changes from
seconds. selection to the Setup menu
Wait 10 - 12 Stores and closes the Setup menu
seconds.
briefly until the desired
briefly until H appears at the
briefly until Km/h/Mph flashes.