Duplex Copying - Kyocera 1650 Advanced Operation Manual

Duplex Copying

Two-sided copies can be made from a variety of originals including double-page spread or
two-sided originals.
Note
The optional duplex unit must be installed.
The following modes are available for duplex copying.
Mode
1 sided->2 sided
[1-sided->2-sided]
(2-sided copying from 1-sided
originals)
2 sided->2 sided
[2-sided->2-sided]
(2-sided copying from 2-sided
originals)
Description
One-sided originals are copied onto the front and back sides of the
copy paper. If the number of originals is odd, the back side of the
last copy page is blank.
Original
Note
In the 1-sided to 2-sided mode, select the following setting.
• Stitch at left/right of originals
The images for the back side are copied without rotation...A
• Stitch at left/right of originals
The images for the back side are rotated 180 degrees and
copied. Finished copies can be bound at the top so that
double-page spread pages are copied in the same
orientation...B
ghi
def
abc
Original
Front and back sides of originals are copied in the same way onto
both sides of copy paper.
Original
Note
The paper sizes that can be used are A3 to A5R, Folio, 11 × 17"
(Ledger), 8 × 14" (Legal), 8
1/2
5 × 8 " (Statement), 8
1/2 1/2
Copier Functions
Copy
Finished stitch at left of copies:
Finished stitch top of copies:
A B
ghi
abc
abc
def
Copy
Copy
× 11" (Letter), 11 × 8
1/2
× 13" (Oficio II), 8K, 16K, and 16KR.
1/2
ghi
",
1/2
1-13