Split Copying - Kyocera 1650 Advanced Operation Manual

Split Copying

Each page of double-page spread or two-sided originals is copied separately.
The following modes are available for split copying.
Mode
2 sided->1 sided
[2-sided->1-sided] (Split
copying from double-page
spread originals)
Book->1-sided (Split
copying from 2-sided originals)
1
Set the original.
2 Press the Duplex/Split Page key.
3
Press the
copy mode from 2 sided->1 sided
[2-sided->1-sided] and Book->1-sided.
4 Press the Enter key.
If you have selected 2 sided->1 sided [2-sided->1-sided], proceed to the next step.
If you have selected Book->1-sided, proceed to step 7.
5
Press the
side.
6
Press the Enter key.
Description
Each page of two-sided originals is copied separately.
Each page of double-page spread originals of magazines, books,
etc. is copied separately.
Note
The original sizes that can be used are A3, B4, A4R, B5R, A5R,
11 × 17" (Ledger), 8
limited to 11 × 8
and 16K in the metric specifications. The paper size can be
changed and the zoom ratio adjusted to fit the size of the paper.
key or the key to select the desired split
key or the to select the original stitch
1 1
Original Copy
1 2
1
Original
× 11" (Letter), and 8K. The paper sizes are
1/2
" and 16K in the inch specifications and A4, B5,
1/2
Duplex/Split Page:
Book
2 sided
Book
Original stitch side:
Left side
Top side
Copier Functions
2
2
Copy
2-sided
1 sided
1-sided
1-15