Ram Disk Operation; Ram Disk Functions - Kyocera 1650 Advanced Operation Manual

Printer Settings

RAM Disk Operation

RAM Disk Functions

This machine is equipped with RAM disk functions. The RAM disk is a virtual disk unit that uses a
part of the memory. If you assign a certain size of the memory to the RAM disk, you can use the
RAM disk for electronic sorting (for reduction of total print time) and storage and reading of data.
Also you can use the e-MPS function (see page 2-8).
Important!
•
•
The RAM disk functions are disabled at the default setting. To use the RAM disk functions, set as
follows.
1 Press the Printer key.
2
Press the
3 Press the Enter key.
4 Press the
Mode.
5 Press the Enter key.
6
Press the
7 Press the Enter key. Change # is displayed.
8 Press the Reset key.
9
Press the
10
Press the Enter key. This machine restarts.
RAM Disk Operation
1
Press the Printer key.
2-44
Note that data written to the RAM disk is deleted when this machine is reset or the main power
switch is turned off ( ).
The RAM disk area is assigned from the user available memory. Consequently, note that
printing speed may be lower or insufficient memory occurs depending on the RAM disk setting
value.
key or the key to select MENU.
key or the key to select RAM Disk
key or the key to select On.
key or the key to select Yes.
Ready
GO
CANCEL
MENU
Menu
Page Set
Print Quality
RAM Disk Mode
RAM Disk Mode
Back
On
Off
Do you want to restart?
Yes
No