Emulation; Emulation Mode Selection - Kyocera 1650 Advanced Operation Manual

Printer Settings

Emulation

Note
You can set the emulation for each interface.

Emulation Mode Selection

Emulation modes that can be used with this machine: PCL6, KC-GL, KPDL, KPDL (AUTO), Line
Printer, IBM Proprinter, Diablo 630, EPSON LQ-850
If you set KC-GL, you can set the thickness of the pen and the page size.
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be
automatically performed according to the print data.
If you set KPDL or KPDL (AUTO), the details of any error that occurs during printing can be printed.
1
Press the Printer key.
2 Press the
3
Press the Enter key.
4
Press the
5 Press the Enter key.
6 Press the
interface.
7
Press the Enter key.
8
Press the
emulation.
9 Press the Enter key.
If you have selected KC-GL, set
If you have selected KPDL or KPDL (AUTO), set
If you have selected KPDL (AUTO), perform
2-22
key or the key to select MENU.
key or the key to select Emulation.
key or the key to select the desired
key or the key to select the desired
KC-GL Pen
Ready
GO
CANCEL
MENU
Menu
Print Status Page
Interface
Emulation
Interface
Back
Parallel
Network
Emulation
Back
PCL 6
KC-GL
Thickness.
KPDL Error Printing.
KPDL (AUTO) Alternative Emulation Selection.