Kyocera 1650 Advanced Operation Manual page 22

Copier Functions
Mode
Book->2-sided (2-sided
copying from double-page
spread originals)
1 Set the original.
2
Press the Duplex/Split Page key.
3 Press the
duplex copy mode from 1 sided->2 sided
[1-sided->2-sided], 2 sided->2 sided
[2-sided->2-sided], and Book->2-sided.
4 Press the Enter key.
If you have selected 1 sided->2 sided [1-sided->2-sided], proceed to the next step.
If you have selected 2 sided->2 sided [2-sided->2-sided], or Book->2-sided, proceed to
step 7.
5 Press the
finished stitch side.
6 Press the Enter key.
7
Press the Start key. Scanning of the original starts.
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
8 Replace the original and press the Start key. Scanning of the original is performed.
9
When all originals have been scanned, press the Enter key. Copying starts.
1-14
Description
A double-page spread original of magazines, books, etc. can be
copied onto both sides of copy paper by pressing the Start key one
time.
Note
The original sizes that can be used are A3, B4, A4R, B5R, A5R,
11 × 17" (Ledger), 8
limited to 11 × 8
and 16K in the metric specifications. The paper size can be
changed and the zoom ratio adjusted to fit the size of the paper.
key or the key to select the desired
key or the key to select the desired
Original
× 11" (Letter), and 8K. The paper sizes are
1/2
" and 16K in the inch specifications and A4, B5,
1/2
Duplex/Split Page:
1 sided
2 sided
Book
Saddle Stitch Direction:
Left side
Top side
Copy
2 sided
2 sided
2-sided