Copy Restriction - Kyocera 1650 Advanced Operation Manual

Setting Limit of Use
You can set the limit of use for each registered account.
The items that can be set are shown below.
Item

Copy restriction

Print restriction
Output limit
Scanner
transmission limit
Fax transmission
limit
Note
You can change the management method so that you can set the limit of count for copying and
printing respectively. For details, refer to the
Copy Restriction
You can select whether to permit or prohibit copying.
Note
This item is displayed if
page 4-13.)
1 Display the Limit in use screen referring to steps 1 to 7 of
2
Press the
3 Press the Enter key.
Description of limit
Select whether to permit or prohibit copying.
Able to use — Permits copying.
Unable to use — Prohibits copying.
Select whether to permit or prohibit printing.
Able to use — Permits printing.
Unable to use — Prohibits printing.
Set the limit of total count of copying and printing.
No limit — Does not set the limit of count.
Counter limit — Set the limit of count (0 to 999,999).
Set the limit of count of scanner transmission if the optional
network scanner kit is installed.
No limit — Does not set the limit of count of scanner
transmission.
Counter limit — Set the limit of count of scanner
transmission (0 to 999,999).
Is not permitted — Prohibits use of scanner transmission.
Set the limit of count of fax transmission if the optional fax kit is
installed.
No limit — Does not set the limit of count of fax transmission.
Counter limit — Set the limit of count of fax transmission (0
to 999,999).
Is not permitted — Prohibits use of fax transmission.
Copier Job Accounting
key or the key to select Copy.
KM-NET for Accounting Operation
in the default settings is set to On. (See
Registering a New
Limit in use:
End
Copy
Printer
Job Accounting
Reference
page
4-5
4-6
4-6
4-7
4-7
Guide.
Account.
: Able use
: Able use
4-5