Duplex Printing Error Detection - Kyocera 1650 Advanced Operation Manual

Printer Settings
3 Press the Enter key.
4
Press the
5 Press the Enter key. If you have selected On, Change # is displayed.
6 To set the time that elapses before auto continue is
activated, press the
Change #.
7
Press the Enter key. The Auto Continue (time) screen is displayed.
8 Press the < key or the > key to input the time. You can
set the time to 0 to 495 seconds in 5 second
increments.
9 Press the Enter key.
10 Press the Reset key. The message display returns to the printer basic screen.

Duplex Printing Error Detection

This setting is available if the optional duplex unit is installed. You can select whether or not to
display Duplex disabled Press GO when you select duplex printing and specify a paper type
that cannot be used for duplex printing such as label.
Setting
On
Off
1 Display the Others screen. (See
2 Press the
Error.
3
Press the Enter key.
4 Press the
Duplex print.
5 Press the Enter key.
2-54
key or the key to select On or Off.
key or the key to select
Processing
• If you select GO, one-sided printing is performed.
• If you select CANCEL, printing is canceled.
One-sided printing is performed.
How to Display the Others Screen
key or the key to select Finishing
key or the key to select Proces.
Auto Continue
Back
On
Off
Auto Continue
On
Off
Change #
Auto Continue (time)
30 sec. (0
on page 2-51.)
Others
Resource Prot.
Auto Continue
Finishing Error
Finishing Error
Back
Proces. Duplex print
Staple Setting
495)