On The Unix/Linux Pc With Command Line Interface - Promise Technology SmartStor NS4600 Product Manual

SmartStor NS4600 Product Manual
4. Choose a folder from the Folder Name dropdown menu. (E)
5. In the New IP Address field, type the IP address of the UNIX or Linux PC
from which you will access this folder, then click the Add button.
6. Click the OK button in the confirmation box.

On the UNIX/Linux PC with Command Line Interface

1. Open a terminal window.
2. Create a new folder for the SmartStor. Type mkdir SmartStor and press
Enter.
3. Mount the SmartStor. Type mount NAS4600 IP/VOLUME1/PUBLIC/
SmartStor and press Enter.
Note that the IP address shown above is only an example. See "Finding the
SmartStor's IP Address" on page 23.
Volume1 and Public refer to the default Volume and folder created during
setup. See page 15. If you created a different volume or folder, use those
names.
4. Change to the SmartStor directory. Type cd /SmartStor and press Enter.
38