Skoda Octavia Workshop Manual page 73

OCTAVIA
Edition 11.99
S00.5130.50.20
¤ ¥ ¦ § ¨ ©     ¦ §      §  ©  §  ¦ §    §  ¥ 
! ¥ 
¦    ¨ ¦ §   ¥ "     ¦ §  %
&  §  
(     ¦    ¨ ¦ §  § 
1  §  © ¦    ¨ ¦ §  % 2 3 4 5 6 7 7 8 3 9 @ ¥  ©  ¨ ¨  © ! § ¥

0
Shift Mechanism/Housing
 © ©  ¥ © ! § ¥ © § © )   § ¨ ¨ § $ ! ¥   § ! ¥ © 
  B
K -
-
-
-
Notes:
K - Always replace the O-ring for sealing bevel
box/gearbox -arrow A- and the seals for seal-
ing the oil supply drillings -arrow B and C-;
oil lightly.
- Push bevel box fully up against gearbox and
fit together spline of input shaft/bevel box
-1- with connecting sleeve of differential cen-
trally.
- Likewise align spline of joint flange/output
shaft -2- and differential bevel gear; rotate
at joint flange, if necessary.
- If the teeth are correctly positioned and cen-
tred, the bevel box slips against the manual &  ¥ ¥ ! ¥ 
⇒
gearbox as far as the stop.
"  !    )   ©
- Do not pull the bevel box against the gear-
box with the securing bolts otherwise the
bevel box may be twisted and the mounting
eyes may shear off.
K ♦ Seals in the flanges of the propshaft must
not be damaged when removing and install-
ing. If the seals are damaged, the propshaft
must be replaced.
♦ Push propshaft horizontally onto the guide
journal.
♦ Replace gasket for drive shaft.
¦    ¨
" ¦    ¨ ¦ § 
 ¥ #    § $  # %
¦ § ¨ ©  ' § ¥ ¥  ' © ! ¥ 
 © )      ¦ §  %
!  '    !  " §  © ! ¥ )         §  "  
t
E    A &    !  E  §   F G A H    ! ' ! ¥ 
34
A
C
¡ ¢ £
------------ 3 -------------