00
¡ ¢
------------
-------------
Technical Data
Notes on brake and performance
test and on towing vehicle
Brake test on roller dynamometer
♦ Use only dynamometers designed for 4WD
vehicles.
♦ If a dynamometer for a 2WD vehicle is used,
1 to 2 brake tests can be performed with the
ignition switched on and the engine not run-
ning.
Warning!
Run engine for about 5 seconds between the
brake test in order to build up adequate vacuum
in the brake system.
Performance test on roller dynamometer
♦ Use only dynamometers designed for 4WD
vehicles.
♦ On dynamometers designed for 2WD vehi-
cles, the front part of the cardan shaft must
first of all be removed. Pay attention to mark-
ing when re-assembling.
OCTAVIA
Edition 11.99
S00.5130.50.20