Skoda Octavia Workshop Manual page 56

34
¡ ¢ £ ¤
------------ -------------
Shift Mechanism/Housing
K - Take off bracket -1- above the exhaust sys-
tem -arrows-.
- Separate exhaust system at the double
clamp -2- and remove together with catalytic
converter (2nd person required).
⇒ Repair Group 26; Removing and installing
parts of the exhaust system.
- Remove front and middle shields.
- Remove propshaft ⇒ page 39-44.
- Swivel shift housing down and take out to-
gether with cables.
Installing
Installation is carried out in the reverse order.
Pay attention to the following points:
K - Coat a small quantity of poly resin grease
into the ball socket of the shift cable lock -A-
and of the selector cable lock -B-.
Note:
The seals -arrows- outside of the ball socket
must be free of grease.
K - Press the shift cable onto the gearbox shift
lever and the selector cable onto the relay
lever (arrows).
Set shift mechanism ⇒ page 34-13.
Tightening torques
Shift housing to body
Bracket to body
Cable support to gearbox
OCTAVIA
25 Nm
25 Nm
20 Nm
Edition 11.00
S00.5130.52.20