Skoda Octavia Workshop Manual page 15

OCTAVIA
Edition 11.99
S00.5130.50.20
¡ ¢ £ ¤ ¥
¡ ¦ § ¨ ¢ ©  § £   ©
Technical Data
♦ Re-gauge shims at several points with a mi-
crometer. Different tolerances make it pos-
sible to exactly gauge the required shim thick-
   © ¥ ness.
♦ Inspect for burrs or damage.
♦ Install only shims which are in proper condi-
tion.
♦ Do not mix up. Assign synchronizer rings to
the same gear when re-installing.
♦ Inspect for wear, replace if necessary.
♦ Insert with gear oil.
♦ Clean and heat on a heating plate to approx.
100 °C before pressing on.
♦ The temperature can be checked with the
temperature measuring instrument (e.g.
V.A.G 1558).
© £ §
 ¥
00
------------ 00- -------------