Skoda Octavia Workshop Manual page 103

OCTAVIA
Edition 11.99
S00.5130.50.20
Final Drive/Differential
- Place drip tray below.
K - Disconnect oil return-flow line for turbo-
charger from engine -arrow-.
⇒ 1.9-ltr./66 kW (TDI) Engine, Mechanical
Components; Repair Group 21; Charge air
system for turbocharger
- Use V.A.G 1669 or commercially available 6
mm wrench socket to remove screw for joint
flange of right output shaft.
K - Screw the pulling device T10037 onto the
right joint flange.
- Align pulling device parallel to the flange with
the knurled nut T10037/1 and the bottom
support -A-.
- Pull out joint flange of right output shaft.
- Use an assembly lever to lever out seal for
joint flange.
Installing
K - Insert new seal as far as the stop
- Pack space between sealing lip and dust lip
with universal grease.
- Carefully knock in joint flange of output shaft;
rotate during this step.
- Attach joint flange of output shaft with coni-
cal bolt.
- Press in new end cap.
39
------------ 39-3 -------------