Skoda Octavia Workshop Manual page 162

39
¨ ©   
------------ -------------
¢ £ ¤ ¥ ¥ ¦ ¡
¡ §
Final Drive/Differential
- Lightly oil outer diameter of new seal and
between the sealing lips with high-perform-
ance oil for the Haldex coupling G 052 175
A1 before installing.
K - Knock in the new seal until flush.
- Install propshaft flange.
K - Insert new hexagon nut -arrow- with locking
fluid D 000 600 and tighten to 220 Nm.
A - M 8 x 20 hexagon bolts
Note:
When tightening the hexagon nut, counterhold
the propshaft flange by means of the stop plate
T30012/1A with bolted-on counterholder
T30004.
- Install rear final drive ⇒ page 39-66.
- Inspect oil in the Haldex coupling ⇒ page
39-70; change oil in the Haldex coupling, if
necessary ⇒ page 39-71.
- Specification ⇒ page 00-2.
OCTAVIA
Edition 02.00
S00.5130.51.20