Skoda Octavia Workshop Manual page 174

39
Read measured value block
00000000 00000000
Read measured value block
11.7 V 36 °C
U V W X Y
------------ -------------
Final Drive/Differential
1 →
36 °C 11.7 V
2 →
¤ ¥ ¦ § ¡
¡ ¢ £ ¨
 § ¡ 
¥   £ ¨ ¥
  ! " # $ % # & '
$  & $ 
 %
oil level in
or
2 3 6 7 8 9 3
4 5 @
D 9 3
7 G H 5 @
♦ Vehicle system tester V.A.G 1552 with cable
V.A.G 1551/3
♦ Hand pressure gun, e.g. V.A.G 1628
oil level in
K - Switch off ignition (if not already off) and con-
nect vehicle system tester V.A.G 1552 with
the diagnostic cable V.A.G 1551/3A.
I  " ( P
% Q 1 
- Switch on ignition and select address word
22 for ”4WD electronics”.
- Initiate function 08 for reading measured
value block.
to 09.99
I  " ( P
% Q
- Select display group number 001.
K Readout in display:
The third display block indicates the oil tempera-
ture.
from 10.99
R $ ! S  )  " ( P
% S 1 T
- Select display group number 002.
K Readout in display:
The second display block indicates oil tempera-
ture.
for all
l The oil temperature must be 20...40 °C.
The oil temperature can be reached by
warming up the engine.
K - Unscrew the oil inspection plug -arrow-.
The oil is at the correct level if the Haldex cou-
pling is filled up to the lower edge of the inspec-
tion hole or up to at least approx. 3 mm below
the lower level of the inspection hole.
- Screw in plug -arrow-.
  
¤ 
©
§ ¡
 ¡ ¨ ¨
" ! ) ! (  )
( & & (  0 1
oil
and
8 A 6 B C D E
6 F
% Q  &
S00.5130.51.20
OCTAVIA
Edition 02.00