Skoda Octavia Workshop Manual page 116

39
29 - Output flange
1)
30 - 350 Nm
♦ Unscrewing
¡ ¢ £ ¤ ¥
♦ Screwing on
♦ Always replace
♦ Insert with gear oil
31 - Shim S
4
♦ Note thickness
♦ Setting survey
♦ Fit onto spacer ring (item 32) before
installing the seal (item 33) and be-
fore inserting the inner race for the
small taper roller bearing (item 34)
------------ -------------
Final Drive/Differential
page 39-18
page 39-25
page 39-31
32 - Spacer ring
♦ Fitting location: chamfer points toward
shaft bevel gear (item 27)
♦ Fit onto shaft bevel gear (item 27)
before installing the seal (item 33) and
before inserting the shim S
and also the inner race for small ta-
per roller bearing (item 34)
33 - Seal
♦ Replace only when bevel box re-
moved page 39-5
OCTAVIA
(item 31)
4
Edition 02.00
S00.5130.51.20