Add/Remove Cameras - Eneo FNR-4004/500 User Manual

Add/Remove Cameras
The FNR‐4004 provides no analog camera connection; therefore it can be used as NVR only, with 4 IP cameras at
4CIF resolution or 2 IP cameras at 2‐mega pixel resolution configurable.
To add an IP camera to an FNR‐4004
1. Enter the Add/Remove Cameras menu, shown in Figure 50 by going to Main Menu > Cameras Setup >
Add/Remove Cameras.
2. If an IP camera and NVR are in same LAN. IP cameras will be automatically previewed and recorded in NVR,
shown as figure 51.
3. You can preview image on cameras by clicking
camera.
Note: HDD needs to be formatted before starting to record images on cameras.
Figure 50. Add/Remove Cameras Menu
Figure 51. Add/Remove Cameras Menu
icon. By clicking icon you may also remove an IP
56