Rebooting And Locking Your Nvr; Setting Date & Time - Eneo FNR-4004/500 User Manual

Rebooting and Locking Your NVR
While in the Shutdown menu (Figure 8), you may also reboot or lock your NVR. Locking your NVR will return
you to the Live Feed mode, which will require the correct administrator password to exit out of it. The Reboot
button will reboot your NVR.
To reboot or lock your NVR:
1. Enter the Shutdown menu by going to Main Menu > Maintenance > Shutdown.
2. Select the Lock button to lock the NVR or the Reboot button to reboot the NVR.
Setting Date & Time
It is extremely important to setup the system date and time to accurately timestamp recordings and events.
To setup date and time:
1. Enter the System Configuration menu by going to Main Menu > System Configuration, as shown in Figure 9.
2. Click the Time/Date button to enter the Time/Date menu (Figure 10).
Figure 9. System Configuration Menu
Figure 10. Time / Date Menu
16