Table of Contents
Advertisement
3. The current system time and date as well as the time zone will be displayed. Using the directional buttons on
the front panel/remote or the mouse, select the correct date, time and time zone.
4. To enable Daylight Savings Time, click and check the Enable DST checkbox.
5. To acquire the time and date over an NTP (Network Time Protocol) Server, check the Synchronize via NTP
server checkbox. You may enter your own NTP server or select from one of the default locations from the list
of servers, as shown in Figure 11.
Figure 11. Time / Date Menu
6. Click the Save button to save settings and click the Exit button to exit out of the menu. Clicking the Exit button
without clicking the Save button will exit the menu without saving.
17
Advertisement
Table of Contents
