Configuring Exceptions - Eneo FNR-4004/500 User Manual

3. Select the alarm input to configure in the Alarm Input No. drop down menu on the upper left of the menu.
If all alarm inputs are to be configured with the same settings, select All from the list.
4. Select the Trigger Action for the external alarm input device. Normal Open or Normal Close can be selected.
5. Select the PTZ Actions (only if a PTZ camera is configured on the NVR) to run when the alarm input is
triggered. Only one PTZ action can be selected per alarm input.
6. Select the Actions to run when the alarm input is triggered. Multiple actions can be selected per alarm input.
The action available includes:
• Sound Audio Warning: NVR will sound an audio warning if alarm is triggered.
• Pop­up Image on Monitor: NVR will show the corresponding channel that is associated with the trigger
input.
• Notify Surveillance Center: NVR will notify surveillance center when alarm is triggered.
• Send Email: NVR will send an email out to the designated recipients when alarm is triggered.
• Trigger Alarm Output: NVR will trigger alarm output when input is triggered. Selecting this option will
enable the Alarm Output list, where the output to trigger can be selected.
7. Select the Save button to save the trigger settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Configuring Exceptions
Actions can also be triggered when the NVR detects certain exceptions. To setup exception configuration:
1. Enter the Exception Configuration menu, shown in Figure 45 by going to Main Menu > System Configuration
> Exception Configuration.
2. Select the Exception Type to configure. The exception type includes:
• HDD Full: If selected, trigger action when HDD is full.
• HDD Error: If selected, trigger action when errors on the HDD are detected.
• Network Failure: If selected, trigger action when a network failure is detected.
• IP Conflict: If selected, trigger action if an IP conflict is detected.
• Illegal Login: If selected, trigger action when illegal logins are detected.
• Video Exception: If selected, trigger action when an exception such as distorted video is detected.
• Video Output Standard Mismatch: If selected, trigger action when video output standard does not
match.
3. Select the Actions to take when the exception is detected. More than one action can be selected.
The actions available includes:
• Sound Audio Warning: NVR will sound an audio warning if exception is detected.
• Notify Surveillance Center: NVR will notify surveillance center if exception is detected.
• Send Email: NVR will send an email out to the designated recipients if exception is detected.
• Trigger Alarm Output: NVR will trigger alarm output if exception is detected. Selecting this option will
enable the Alarm Output list, where the output to trigger can be selected.
Figure 45. Exception Configuration Menu
49