4. Select the Save button to save the exception settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Configuring Email Settings
If you would like to have the NVR send out e‐mails when certain events are detected or exceptions have been
triggered, you must first setup the e‐mail settings.
To setup e‐mail settings:
1. Enter the Email Configuration menu, shown in Figure 46 by going to Main Menu > System Configuration >
Email Configuration.
Under Server Information, enter all pertinent email information, including:
• Server Authentication: Enable if email server requires authentication. Enabling Server Authenticating
will enable the User Name and Password fields.
• User Name: User name to use for server authentication.
• Password: Password to use for server authentication.
• SMTP Server: Address for SMTP server.
• SMTP Port: Port for SMTP server.
• From Email Address: The From address to use when an e‐mail is sent out from the NVR.
• Attach JPEG: Enabling will attach a small JPEG segment (duration can be set next to the Attach JPEG
checkbox) to the out‐going e‐mail.
• SSL: Enable Secure Sockets Layer (SSL) for out‐going e‐mail.
3. Enter To Email Address and click the Add button. The e‐mail address will be added to the Recipients
List.
4. You may now test the e‐mail settings by clicking the Test button or remove an e‐mail address off the
Recipients List by selecting the recipient and clicking Remove.
5. Select the Save button to save the e‐mail settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Figure 46. Email Configuration Menu
50