Table of Contents
Advertisement
Configuring Cameras
To setup privacy zones
1. Enter the Privacy Zones menu, shown in Figure 47 by going to Main Menu > Camera Setup > Privacy Zones.
Privacy Zones Menu
2. Select the camera to setup privacy zones in using the camera drop down menu on the upper left of the menu.
If all cameras are to be configured with the same settings, select All Cameras from the list.
3. Click Enable Privacy Zones.
4. Up to four privacy zones can be used per camera and are shown using four different colors, yellow, green,
blue and pink. Using the mouse, click and drag out rectangular boxes defining the desired zones.
5. You may clear a privacy zone at any time by clicking on the corresponding Clear Zone button or Clear All
button to clear all zones.
6. Select the Save button to save the privacy zones settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Figure 47. Privacy Zones
52
Advertisement
Table of Contents
