Backing Up Video Clips - Eneo FNR-4004/500 User Manual

Network video recorder, 4 ip-channels, h.264
Table of Contents

Advertisement

8. You may play the video clip using the Play Clip button or use the arrow keys shown next to the clip time   
    range to progress through the video one second, minute or hour at a time. 
9. Click the Save Clip button to save clip to the NVR. Clip must be first saved to the NVR before it can be backed   
    up to an external USB storage device or to a DVD writer. Clicking the Clear Clip button will remove the video   
    clip. 
10. Repeat steps 2‐7 to select additional clips. If you would like to backup video clips at this point, click the   
    Backup button. 
 
Note: The Play Clip, Save Clip and Clear Clip buttons are not available unless a completed video clip is selected. 
A completed video clip has a start and end point marked by using the Start Clip and End Clip button. 
Note: The Start Clip button is not available when there is still a video clip that has not been saved or cleared. 
 
Backing Up Video Clips 
After video clips have been selected in the Playback Interface, you may back them up to an external USB storage 
device or DVD writer by going to the Backup menu. 
 
To backup video clips: 
1. Enter the Clips Backup menu, shown in Figure 34 by first going to Main Menu > Playback. In the Playback   
    menu, click the Clips Backup button. 
 
 
2. If video clips were successfully saved to the HDD using the Playback Interface, they will be listed under the   
    Backup Clips heading on the left hand side of the menu. The camera number as well as the time range would   
    be listed. 
3. Select the video clips you would like to backup by checking the checkbox next to the desired clips. You may   
    also click the Play icon to play and review the clip. Video clips can be deleted by selecting it and clicking the   
    Remove button or by clicking the Remove All button to delete all clips. 
4. Connect at least one USB storage device to the NVR. If the device is compatible with the NVR, it will   
    automatically be detected. Select the backup device from the Backup Device drop down menu. 
5. The Clips Selected, Required Space and Available Space will be displayed on the Clips Backup menu.   
    If the USB storage device has not been properly initialized and formatted, you may click on the Format   
    button to do so. It is important to note that formatting will delete ALL data from the storage device.   
Figure 33. Video Clip Time Range 
 
Figure 34. Clips Backup Menu 
 
 
38

Advertisement

Table of Contents
loading

Table of Contents