Changing the air flow direction
The WIDE SWING button allows you to select "Up", "Rear" or "Wide" for the air flow direction, or
stopping (Off) it at a desired angle.
Press the WIDE SWING button during operation.
By repeatedly pressing the WIDE SWING button, the position of the WIDE SWING louver can be changed in
the sequence shown below. To stop the WIDE SWING louver at a desired angle, press the button again (Off)
when the louver has reached the desired angle.
Operation in Wide Air Flow position
WIDE SWING button
When operation stops, the WIDE SWING louver returns to "Close" position. To restart operation,
press the WIDE SWING button again and select the air flow direction.
Do not expose the WIDE SWING louver to impact or rotate it by force. Otherwise the louver may
After a change in air flow direction, the WIDE SWING louver is determining its position, so it may
take a few seconds until it starts moving.
Any object touching the WIDE SWING louver may cause the air flow direction to change. In this
case, set the air flow direction again with the WIDE SWING button.
The sound produced by the air flow changes with the air flow direction.
WIDE SWING louver