Precautions - Sharp DW-R268A Operation Manual

Precautions

Precautions
Various symbols are used throughout this manual
and on the product to alert you to points relating
to safe use of this product.
These symbols are classified according to the
seriousness of
ignored and explained below.
Please read this section carefully and follow the
instructions.
Do not operate the unit at voltages
other than the rated voltage of 220V.
Using this product at any other voltage may
Prohibited
result in electric shock or fire.
Do not
joined
cords, or sharing a power socket with
Prohibited
other electrical appliances.
Otherwise there is a
risk of electric shock,
heat or fire.
Do not modify or cause damage to
the power cord in any way.
Handle the power cord with care.
Prohibited
Avoid damaging it, bending it
sharply, pulling, twisting, bundling
or heating
objects on it or getting it caught
between objects. Otherwise the
power cord may be damaged,
resulting in electric shock or fire.
Do not try to take out the plug by pulling
the power cord in order to stop operation.
Otherwise electric shock or fire may result.
Prohibited
Do not insert your finger or foreign
objects (pins, wire, sticks) into the air
outlet or air intake.
Prohibited
A fan is rotating at
high speed inside
the unit. Do not put
your hands inside
the unit
injury,
shock and damage
to the unit.
Do not place any spray cans or other
hazardous materials near the unit.
Also make sure not to place any ignition
Prohibited
hazard materials (gasoline, thinner) near the
unit. Otherwise these materials could ignite
or explode, resulting in a fire.
E-2
the risk involved if they
connect this product
electric cords or extension
it, placing heavy
to avoid
electric
Warning
Cautions
are
Warning
Do not place the unit near any heat
sources.
Otherwise resin
Prohibited
material in the
product may melt
and catch fire.
using
Do not modify the unit. This unit should
not be disassembled or repaired by
persons
Prohibited
technician.
Otherwise fire, electric
shock or injury may
result.
When any abnormality (e.g. a burning
smell) is noticed, turn the power off,
unplug the unit and consult the SHARP
Prohibited
Service Center.
If the unit continues to
be operated despite
signs of abnormality,
a breakdown, electric
shock
result.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
Musts
persons in order to avoid a hazard.
Make sure that the power plug is not
covered with dust before inserting the
plug into the power socket.
Musts
Regularly wipe off the power
plug with a dry cloth.
Dust on the plug will prevent
a proper connection, which
may result in electric shock
and fire.
If repair is required, please consult
the SHARP Service Center.
Otherwise fire, electric shock or injury may
Musts
result.
Failure to follow this instruction may
result in death or serious injury.
Failure to follow this instruction may
result in injury or damage to property.
other than a
or fire may
qualified