SPECIFICATIONS Device of this mark is a trademark of TROUBLESHOOTING Sharp Corporation. Plasmacluster is a registered trademark or a trademark of Sharp Corporation. Do not use the product for commercial purposes.
FEATURES SAFETY PRECAUTIONS The dehumidifier deodorizes, cleans and quickly To prevent any possible injury to WARNING persons or damage to property, dries clothes hung up in the room by using the be sure to follow the basic safety precautions, including the high-concentration Plasmacluster Ion (PCI) following: technology and the powerful dehumidifying...
Page 3
CAUTION ● In case of an exception (e.g., burnt smell), be sure to immediately shut the unit down and remove its power plug. ● Make sure there is no dust on the power plug and insert it into the outlet Power Plug, Power Cord completely.
PARTS NAME Front View ● Before moving the main unit, always stop the operation and dispose the Control panel water in the water tank. ● Operate the unit only on level, stable surfaces. Louver (If water leaks from the dehumidifier and soaks the furniture in the room, electric (Do not shake it shock, electric leakage or fire may be caused.) with your hand)
BEFORE USE WHAT YOU NEED TO KNOW WHEN MOVING Take out the ● Packaging Always hold the handle and product take out from the box material from the box Stop the dehumidifier, ● Bind the power cord, and move pull out the water tank, it together with the handle.
HOW TO OPERATE AUTO DEFROST CONTROL PANEL ● During defrosting, the defrosting indicator is on, the compressor stops, and the fan keeps rotating at the highest speed. After the defrosting ends, the dehumidifying function starts, the compressor restarts, and the fan resumes the preset speed.
OTHER FUNCTIONS AUTO STOP AT TANK FULL 4. AUTO: The Auto indicator is turned on, and the dehumidifier dehumidifies according to the preset humidity. You can press the HUMIDITY SELECTION (AUTO MODE) button to set the desired humidity. The setting order is as follows: ●...
HOW TO DRAIN After the water tank is removed, the Tank full indicator blinks and the operation stops. WATER TANK CONTINUOUS DRAINPIPE When the water tank is full, the dehumidifier will stop running Unplug the power plug FULL Blinking automatically. You need to empty the water tank and put it back into the main unit.
CARE AND We recommend periodical cleaning for a long, clean and sanitary use! MAINTENANCE AIR INLET WATER TANK Once a week ● Empty the water tank, and ● Remove the Remove the dust then remove its cover water tank cover with vacuum cleaner ●...
SPECIFICATIONS Model DW-D12A MAIN UNIT Power Supply 220V-240V/50Hz 12L/day 30°C/80%RH Dehumidifying Capacity Use a soft cloth soaked with warm water (lower than 35°C) or neutral detergent (for tableware) to wipe dirt from the surface. 26.7°C/60%RH 6.5L/day Power Consumption 26.7°C/60%RH 160W ●...
32°C). indicator is still blinking. The unit may malfunction. such as C0 and C3 Please contact SHARP authorized service centre. When the currently ● When the humidity setting button is not pressed during operation of displayed humidity is...
Page 12
DW-D12A High - Density 7,000 PCI 7000 Plasmacluster Ion Plasmacluster SHARP...
Need help?
Do you have a question about the DW-D12A and is the answer not in the manual?
Questions and answers