CONTINUOUS DEHUMIDIFY operation
CONTINUOUS DEHUMIDIFY mode, air flow rate "Low", slightly high humidity, WIDE SWING louver in air flow direction "Up".
Press the POWER ON/OFF button.
The OPERATION indicator lights and AUTO DEHUMIDIFY operation starts.
With the start of operation, the WIDE SWING louver rotates from "Close" to "Up" and stops in that position.
Press the CONTINUOUS DEHUMIDIFY button.
The "Low" air flow indicator for CONTINUOUS DEHUMIDIFY lights, and the unit starts
CONTINUOUS DEHUMIDIFY operation at "Low" air flow.
Changing the air flow rate
Set the direction of the WIDE SWING louver.
Choose the optimum setting.
Press the POWER ON/OFF button again.
When operation stops, the WIDE SWING louver returns to "Close" position. Note that in stopped
condition, the humidity is not indicated.
* If the POWER ON/OFF button is pressed to restart the unit after a stop, the unit resumes
operation in the previous selected mode.
WIDE SWING button
In the cases below, the unit stops dehumidifying and blows air only.
When the room humidity is below 40% at temperatures over 35¡C
When the room humidity is less than 30% at temperatures more than 28¡C but less than 35¡C
This causes the room temperature to rise and the air to dry out. Do not operate the unit for long
periods in rooms where people are present.
Press the CONTINUOUS DEHUMIDIFY button again and select Air Flow mode. The CONTINUOUS
DEHUMIDIFY Air Flow indicator lights and the air flow rate changes in the sequence shown below.
CONTINUOUS DEHUMIDIFY button
* At Full Power, the unit operates at a
dehumidifying rate equal to 26 liters/day.
POWER ON/OFF button