DRY CLOTHES operation
DRY CLOTHES mode, slightly high humidity, WIDE SWING louver in air flow direction "Up"
WIDE SWING button
Press the POWER ON/OFF button.
The OPERATION indicator lights and AUTO DEHUMIDIFY operation starts.
With the start of operation, the WIDE SWING louver rotates from "Close" to "Up" and stops in that position.
Press the DRY CLOTHES button.
The "Low" indicator for DRY CLOTHES mode lights, and the unit starts DRY CLOTHES operation at "Low" air flow.
In the cases below, the unit stops dehumidifying and blows air only.
Changing the air flow rate
Combining this with PLASMA CLUSTER ION (Clean) mode will deactivate the mold spores floating in
the air (see
Set the direction of the WIDE SWING louver.
Choose the optimum setting.
Press the POWER ON/OFF button again.
When operation stops, the WIDE SWING louver returns to "Close" position. Note that in stopped
condition, the humidity is not indicated.
* If the POWER ON/OFF button is pressed to restart the unit after a stop, the unit resumes
operation in the previous selected mode.
At "High" air flow rate, your clothes will dry faster, but the unit will generate more noise.
DRY CLOTHES button
When the room humidity is below 40% at temperatures over 35¡C
When the room humidity is less than 30% at temperatures more than 28¡C but less than 35¡C
Press the DRY CLOTHES button again and select Air Flow mode.
The DRY CLOTHES Air Flow indicator lights and the air flow rate
changes in the sequence shown below.
for CLUSTER ION effect) and help to make your clothes even cleaner.
POWER ON/OFF button