Dry clothes operation
(Example of indication)
Insert the plug into the power socket
The current humidity will not be displayed accurately
for around one minute when the unit is plugged in.
This is because the humidity sensor is checking the
If the "full tank indicator" blinks, empty the water tank
and reinstall the tank properly.
Press the Power ON/OFF button.
Operation indicator lights, and "STANDARD" operation
Press DRY CLOTHES SETTINGS
button and select operation
Operation mode is sequentially switched.
Set the airflow direction of the louver.
Set the optimum direction of airflow based on the individual usage and purposes.
When the drying clothes process is in operation, you cannot use "Fan speed/HIGH, ON/OFF" and "Fan
speed/LOW, ON/OFF" button.
Press the Power ON/OFF button again.
Operation indicator will be turned off and the operation stops.
The crystal monitor will continue to show the comfort levels,
temperature and humidity of the room even if operation stops.
If you press operation key again after the operation has stopped, the operation will start from the last operation
Operating state in STANDARD mode
ON / OFF
Humidity indicator blinks up and down.
Operation cannot be
started unless the water
tank is installed.
Select when you want to dry
clothes under normal situation.
When you want to dry lingerie
gently and quietly.
When you are in a hurry to dry
large quantities of clothes.