Installing a 2104 Model DS4 into a rack
The following sections describe how to install a 2104 Model DS4 into an RS/6000
or IBM Eserver pSeries rack.
Checking the items for a 2104 Model DS4
Ensure that you have received all the parts required for your 2104 Model DS4. See
Figure 17.
Note: If your 2104 Model DS4 has only one fan-and-power-supply assembly, only
Figure 17. Items for the 2104 Model DS4
1. The box ID label 8 contains small labels. Use these to label your disk
2. Refer to "Web sites" on page xxx for the latest microcode and system software
2
Expandable Storage Plus 2104 Model DS4 Installation Guide
one power cable is supplied.
1
1
2104 Model DS4
2
Mounting screws (front)
3
Rail mounting screws
4
Nut clips
enclosure. See step 3 on page 19.
levels. When you complete the installation, you will be asked to ensure that the
latest levels of software and microcode are installed.
5
Support rails
6
Mounting screws (back)
7
Power cable(s)
8
Box ID label
8
SC000205