Installation Guidelines For Rack Mount Enclosures - IBM 1 U Installation Manual

Figure 2. SCSI accessory kit contents.

Installation guidelines for rack mount enclosures

Review the documentation that comes with your rack cabinet for safety and cabling
information. Before installing your enclosure in a rack cabinet, consider the following
guidelines:
v Two or more people are required to install the device in a rack cabinet.
v Ensure that the room air temperature is below 35°C (95°F).
v Do not block any air vents, usually 15 cm (6 in.) of space provides proper airflow.
v Do not leave open spaces above or below an installed enclosure in your rack
v Plan the device installation starting from the bottom of the rack cabinet.
v Install the heaviest device in the bottom of the rack cabinet.
v Do not extend more than one device out of the rack cabinet at the same time.
v Do not overload the power outlet when installing multiple devices in the rack
Use safe practices when lifting.
Do not place any object on top of
rack-mounted devices.
4
IBM 1 U Rack Mount Tape Enclosure: Installation Guide
SCSI signal connector
and screws
cabinet. To help prevent damage to enclosure components, always install a blank
filler panel to cover the open space and to help ensure proper air circulation.
cabinet.
SCSI ID connector
External SCSI cable
≥32 kg (70.5
≥18 kg (39.7
lb)
lb)
≥55 kg (121.2
lb)