Connecting The Battery Pack (Remote Control Model) - Flavel Kenilworth HE Installation, Maintenance & User Instructions

3.5 CONNECTING THE BATTERY PACK (Remote Control Models)
a) To prevent un-necessary battery drain, the battery pack that is
used to provide the remote control function for this product is
disconnected at the factory. Prior to attempting to light the product, can
the installer please ensure that the battery pack is re-connected as
shown in section b), & c) below.
b) Locate the battery pack in the support cradle at the bottom R/H side of
the firebox / burner assembly.
c) The wire and connecting plug from the battery pack should then be
connected into the supply wire running from the control board. See Fig
36 below.
Fig. 36
Note : Ensure that the battery pack is re-fitted correctly into itʼs
mounting cradle
Battery
Pack
Connecting Wire
32
Connecting
Plug