Fitting The Trim / Fret (Kalahari Models); Fitting The One Piece Fascia (Camber Models); Fitting The One Piece Hitw Fascia (Passion Models) - Flavel Kenilworth HE Installation, Maintenance & User Instructions

3.8 FITTING THE TRIMS & FRETS (Kenilworth Models)
a) Fit the outer trim assembly to the firebox with the magnets
provided.
b) Remove the fret & ashpan cover from the packaging.
Place fret up to the front radiused burner heat shield
c) Place ashpan cover under fret assembly and centralise.
NOTE : Some models in this range are not supplied with a fret from the
factory, therefore please consult your local retailer for fitting
advice on the type of fret supplied with these models.
3.9 FITTING THE ONE PIECE FASCIA'S (Linear Models)
a) Remove the protective covering from the Fascia
b) Fit the outer trim assembly to the firebox with the magnets
provided.
c) Place ashpan cover onto fascia.
3.10 FITTING THE ONE PIECE HITW FASCIA'S (Diamond Models)
a) Hook the fascia onto the top mounting bracket fitted to the firebox
b) The bottom of the fascia is retained by magnets fitted to the lower
retaining brackets.
35