Flavel Kenilworth HE Installation, Maintenance & User Instructions page 47

Table of Contents

Advertisement

ABOUT YOUR NEW KENILWORTH / LINEAR / DIAMOND HE (High
Efficiency)
The Flavel High Efficiency coal / pebble effect gas fire incorporates a unique and
highly developed fuel bed which gives the realism of a loose coal / pebble layout
combined with realistic flames and glow. The use of durable ceramic material in
the construction of the fuelbed components ensures long and trouble free
operation.
When first using your new fire a slight smell may be noticed. This is due to starch
used in the manufacture of the soft ceramic coals / pebbles, it is non-toxic and will
soon disappear.
Please take the time to fully read these instructions as you will then be able to
obtain the most effective and safe operation of your fire.
IMPORTANT SAFETY INFORMATION
WARNING
This appliance has a naked flame and as with all heating appliances a
fireguard should be used for the protection of children, the elderly and
infirm. Fireguards should conform to B.S. 8423 : 2002 (Fireguards for use
with gas heating appliances).
It is important that this appliance is serviced at least once a year by a registered
gas installer and that during the service the fire is removed from the fire opening
and the chimney or flue visually checked for fallen debris or blockages which must
be removed. The chimney should also be checked to ensure clearance of flue
products. We recommend that during the annual service, replacement of the
Oxypilot is carried out. This is a condition of the manufacturers guarantee.
After installation or during servicing a spillage test must always be carried
out.
Rubbish of any type must NEVER be thrown onto the fuel bed, this could affect
safe operation and damage the fire.
Any debris or deposits should be removed from the fuel bed from time to time.
This may be carried out by referring to the cleaning section as described later in
this book. Only the correct number and type of coals or pebbles must be used
and only complete and genuine replacement sets must be used.
Always keep furniture and combustible materials well clear of the fire and never
dry clothing or items either on or near to the fire. Never use aerosols or
flammable cleaning products near to the fire when it is in use.
The ceramic fuel bed remains hot for a considerable period after use and
sufficient time should be allowed for the fire to cool before cleaning etc.
The fire must only be operated with a fender which meets the criteria described in
the rear of this book.
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Diamond heLinear he

Table of Contents