Connecting The Battery Pack - Flavel Emberglow Classic RC User Manual

3.2

CONNECTING THE BATTERY PACK

a) To prevent un-necessary battery drain, the battery pack that is
used to power the remote control function for this product is
disconnected at the factory. Prior to attempting to light the product, can
the installer please ensure that the battery pack is re-connected as
described in section b), c) & d) below.
b) Locate the battery pack in the support cradle at the bottom R/H side of
the fire, behind the ashpan cover.
c) The wire and connecting plug from the battery pack should then be
connected into the supply wire running from the control board. See Fig
13 below.
Fig. 13
d) Replace the battery pack into its mounting cradle below the fire / burner.
Battery
Pack
Connecting Wire
Connecting
Plug
16