6
6.4
Changing USB memory setting
1
Press the Utility key.
2
Use the +/, key to select [ADMIN. MANAGEMENT], then press the OK key.
3
Enter the administrator number using the Keypad, then press the OK key.
% The factory default of the administrator number is [000000].
4
Use the +/, key to select [USB MEMORY SETTING], then press the OK key.
5
Use the +/, key to select [USB DIRECT PRINT], then press the OK key.
6
Use the +/, key to select [DISABLE] or [ENABLE], then press the OK key.
The screen returns to the USB memory setting screen.
6-7
Changing USB memory setting
6.4
bizhub 306/266