Barco E2 User Manual page 92

6. GUI orientation
• SDI Input type
The SDI input configuration menu is similar to the DVI/HMDI/DP menu but without the EDID and HDCP sections. In addition
the SDI menu includes an addition selection regarding the SDI type. The choices are : HD, Level A or Level B
Image 6-19
Auto Acquire Feature discussion:
When the Auto Acquire is On, the system performs a full sync acquisition on the input signal whenever:
• You select an input
• The input type changes
• The sync rate of the input signal changes
During acquisition, the system detects and acquires the input type and resolution When In Auto Acquire is off, the system uses the
last known configuration, when possible. If the input signal is incompatible with the saved configuration, a good input lock may not
be possible. In this case, the format name field in the Status Menu displays the Invalid Signal message.
Please note the following important points regarding In Auto Acquire:
• It is recommended that you turn Off Auto Acquire in applications where you have already configured and saved the system's
input setup.
• If Auto Acquire is On and a valid input is selected that does not have a saved input associated with it, the system attempts to
detect and acquire the source. This process may take a few moments.
• If Auto Acquire is Off, the system uses the last-known configuration for each input, to the extent possible, comparing the input's
timing to the configurations in the system's library. These configurations can be custom files or system default configurations.
• Most users can leave In Auto Acquire on. Advanced users who know the input video timing parameters may choose to turn In
Auto Acquire off and select the parameters manually.
Input adjustment panel > Format & Timing
This is a status and informational menus. No adjustments can be done here.
88 R5905948 E2 12/12/2014