Barco E2 User Manual page 105

Or,
click in the "x" on the right hand side in the destination configuration list.
Image 6-29
destination(s) is immediately outlined in red.
3. The deletion is completed by clicking the Delete Selected button.
Any output can be deleted from a destination at any time. For example, if the output that is automatically
assigned to a destination is not the desired one, then it can be deleted.
All destinations can be deleted the same time by clicking the "Select All" button.
How to access to the Destination configuration adjustments
Adjustments to Destinations are performed in the "Adjust" panel:
1. Select the destination from the configuration list
Or,
clicking on the graphic representation the destination in the Diagram area.
A Destination is selected.
2. Click on the Adjust tab that is on the top of the Adjustment area.
Image 6-30
The Destination adjustment panel is displayed.
Destination adjustment panel description
The Destination adjustment panel is divided in three sections:
R5905948 E2 12/12/2014
6. GUI orientation
101