Barco E2 User Manual page 204

9. General operation example
Image 9-14
P2: You can skip this step if you don't want thumbnail images to represent the inputs/sources. In this case,
the layers in the destinations area will be black and noted only by the assigned name.
P2: Select thumbnails for Inputs
1. From the left hand side, click on the Input tab.
2. Next to the Refresh All Thumbnails click on the thumbnail button.
3. Click in the black box and navigate the computer to find and select the desired pic.
4. After a pic is selected, the image will fill the black square.
5. Repeat this sequence until a pic is selected for each input.
6. When these steps are completed, the section will appear as follows.
200 R5905948 E2 12/12/2014