Barco E2 User Manual page 212

9. General operation example
P7: Create user Keys and Presets
1. Select the Site screen destination and the layer in preview.
2. Under the Preset tab click in the "Save to new Preset" button.
3. Edit the name to reflect the source that is on Preview.
4. Repeat the previous steps to save 3 more presets, so we have a preset for both video clips and both cameras.
Image 9-24
5. Select the Main screen and select the sources into the two PiPs are the event requirements described in the introduction of the
application note.
6. Save each look into a preset and give it an appropriate name.
Now you are ready to execute the presets and transition on the desire preview look into Program. Remember to select the corre-
sponding destinations when you use the Trans All button.
208 R5905948 E2 12/12/2014