Barco E2 User Manual page 120

6. GUI orientation
Priority
Image 6-46
1 Moves the selected layer up in priority and swaps with the layer previously above.
2 Moves the selected layer to the top of the priority and swaps it with the layer previously on top.
3 Moves down in priority and swaps the z-order of the selected layer with the layer previously below.
4 Moves the selected layer to the bottom of the priority and swaps it with the layer previously at the bottom.
Example:
Image 6-47
Only the visual priority (on Preview) of the two layers changes. The layers remain at their current locations
— only the priority changes.
Size and Position
Image 6-48
116 R5905948 E2 12/12/2014