9. General operation example
Image 9-9
C6: Add Aux Destinations
1. From the diagram area click on the DSM output. The connector will be highlighted.
2. Click on the +Add Aux Destination blue button to assign the DSM output to an Aux destination.
3. When the Aux destination is created a box appears next to the E2 diagram.
4. Double click on the Destination1 area in the Name list to edit the name.
5. When the area turns blue, click the eraser icon to clear the field.
6. Type a new name, "DSM". Hit enter when done.
Image 9-10
C7: Add MVR Output
1. Click on the MVR tab to select the MVR outputs that will be defined.
2. Click on the +Add MVR Output blue button to enter the Add mode.
R5905948 E2 12/12/2014
197