Barco E2 User Manual page 270

10. Maintenance
3. Locate the snap lock on the top of the connector and push it back to release the connector from the bracket.
Image 10-78
4. Push the connector up until the slots in the metal bracket align with the flanges on the connectors.
Image 10-79
5. Gently pull the 3RU cable assembly away from the bracket.
Image 10-80
6. Turn the unit upside-down and remove the bottom panel.
7. Locate the 3RU cable that is plugged on the System-Power board.
266 R5905948 E2 12/12/2014